Watchmaking
About us
Services & FAQ
The basic watchmaker’s tools are composed of several tools and families of tools.
You will notice in this article that a large part of the tools presented come from the BERGEON company. For more than two centuries, this company has been developing and marketing its entirely Swiss Made tool (suppression du lien) to a large majority of watchmaking professionals and companies, including Initium.
Antimagnetic, with a fine point or an exceptionally fine tip, there is a multitude of them.
What we call tweezers, always in the plural, are small pliers used for precision work and handling of various watchmaking parts, such as screws, cogs or pinions.
Generally made of steel, tweezers are also available in other materials.
The screwdrivers generally come in batches and are placed on a rotating base associated with a non-slip base, to facilitate handling and storage. These bases can contain up to ten screwdrivers.
The screwdriver is an essential watchmaking tool for the assembly, disassembly and adjustment of a timepiece. Indeed, it allows to manipulate exceedingly small elements within a movement.
The screwdrivers are generally made of stainless steel with an elastomer membrane. Their head is ergonomic and made of self-lubricating POM (polyoxymethylene) synthetic material, thus facilitating their use.
In watchmaking, it can be visually complicated to manipulate exceedingly small parts that make up the movements of a watch. Therefore, watchmakers use a magnifying glass as a tool to improve their vision and precision.
Watchmaker’s magnifiers can be offered in various forms, all of which allow the watchmaker to have both hands free:
In watchmaking, lubrication is essential. Its action by the film of oil or grease prevents the direct contact of the varied materials in its presence. Indeed, friction can create energy losses due to friction or wear of the mechanical performance.
The tool related to watch lubrication is generally in the form of an oiler, allowing the storage of oils and greases necessary for the lubrication of watch parts.
Most models have four compartments, or cups, in which the necessary materials are stored. The watchmaker then uses a small brush to take the material and place it on the movement parts.
A central visual element of a watch, the case protects the movement of the timepiece from shocks, dust, and humidity.
In order to close the case, it is necessary to manipulate the back of the watch (suppression du lien), the part opposite the dial. Generally, the simple manual force is not enough for a watchmaker to close a watch. It is therefore recommended to use different tools, depending on the type of back, to close it.
A steel stem is a stable tool with a threaded mechanism generally used to close pressure watch backs.
The casing cushion is provided with a flat surface allowing the placing of watch parts, but more particularly, and as its name indicates, the watch case in order to carry out the casing. Made of flexible and non-slip material on both sides, this watchmaking tool prevents scratching watch glasses.
In the watchmaking industry, the tool that allows to put on and take off the bars of a bracelet is essential.
We present here the tool mainly used in watchmaking: the spring bar. It contains a spring to fix the strap to the lugs of the watch case.
This tool is generally composed of forks or spikes acting as a lever to facilitate the manoeuvre on a bar.
In order to ensure a clean installation of the watch hands, it is necessary to use a dedicated tool to facilitate their installation.
This tool allows you to press perpendicularly on the centre of the needle without touching its axis. It is, however, important to know how to manage the pressure exerted in order to avoid bending the needles.
The movement of a watch being its most delicate component, it cannot be managed directly on a table or in the hands of a watchmaker.
To prevent damage, a movement holder is necessary to secure the movement while working. This tool looks like a small extendable vice and is often made of nickel-plated brass.
This tool is in the form of a non-slip or self-adhesive work mat so that it does not have to be permanently fixed to the work surface. The desk mat is very resistant to chemical products used in the watch industry, such as solvents or alcohol.
These workbench mats are available in an assortment of colours that contrast sufficiently with the parts that make up the movement of a watch, making it easier for the watchmaker to make it.
Finger guards are an essential part of the basic watchmaking tools. Their purpose is not to protect the fingers of the professional, but to protect the watch and its movement from dirt and pollution.
Finger guards also allow fighting against the oxidation of the movements which could be due to the direct contact with the skin of the watchmaker.
These can be made with or without latex but are generally antistatic and do not contain talc.
This hermetic tool, generally made of glass, is used to store and protect the parts and the movement from dust or any other contact when they are not at work.
This receptacle is used to handle and deposit small parts of a movement, such as stones or screws.
This tool in the form of a wooden slat has a covered part generally made of cowhide or felt.
The cabron is mainly used to clean, and sometimes polish, delicate parts of a watch, like the dial.
This pear-shaped rubber instrument is a necessary tool for any operation on the movement of a timepiece. Indeed, it allows removing dust from the movement and some parts because there is always a risk of fine particles entering the movement of the watch.
Its bellows system allows to leave no trace, moreover, its tip generally made of PVC prevents any scratch in case of unfortunate contact. On all blower bulbs, there is a valve on the back to prevent the tool from sucking up potential dust through its tip.
Its use is relatively simple: this blue coloured paste is used to clean all the movement: it allows to remove any imprint and trace of doits or to remove any excess of oil. Its great absorption properties are excellent to remove any deposit without risk.
At Initium, and as ambassadors of watchmaking, we are always happy to satisfy anyone’s curiosity about watchmaking equipment or tools.
Do not hesitate to visit one of our workshops to discover more about Swiss mechanical watchmaking and its tools!
https://www.outils-horloger.euhttps://www.gearpatrol.comhttps://www.selvatime.chhttps://www.venus-diffusion.comhttps://www.web-horloger.frhttps://mdwatch.chhttps://www.mon-petit-horloger.fr
The different watch movements to know
29/03/2023
In this guide, let’s look at the history of the moon phase complication, the technical definition of moon phases, how...
The complete guide to the moon phase watch
30/11/2022
The essential tools for watchmaking
26/11/2022
This article is dedicated to the basic tools owned by any watchmaker. You will find a large part of the...
The different types of complication watches
23/11/2022
Although the main functionality of watches is to tell the time, a wide variety of additional internal components called complications...
How a manual watch movement works
22/11/2022
A true work of art of Swiss watchmaking, a mechanical movement is full of surprises.
Functionning of a mechanical self-winding watch
21/11/2022
From its mechanism to its practicality, the self-winding movement is revealed here.
Horological complication : the tourbillon watch
20/11/2022
Discover the secrets of the tourbillon, which always impresses with its complexity!